Electrician On The Roll Forming Machine Safety Operation Specification
0086-317-8267555
CURRENT LOCATION:
Electrician On The Roll Forming Machine Safety Operation Specification
Electric pressure tile safe operation of machinery can guarantee the safe opreration of electrical machinery running, but also on your own security, an effective security messures.

Tile machinery electrical safety operation is as followings

1, electricians must be familiar with the plant’s electrical wiring and electrical equipment, the type and performance, If you do not fully understand the performance of the electrical equipment, prohibit risky operation.

2, electrical cables should be checked regularly every day, motors, electrical equipment in the console, etc, that discovered the problem, must be dealt with timely. Check motor temperatures, first check the electricity, when without electricity, then to the back of the hand test.

3, in addition to the temporary works to temporary measures taken by electricity, the permitted temporary wire rack, does not allow the temporary wire frame, tools and weiding machine for application security such as welding safety switches and sockets, not allowed to change the original electrical wiring.

4, required periodic inspection and maintenance of electrical equipment, unused electrical equipment lines must thoroughly remove.

5, part of the power failure operation, when approaching a body from the electrical maintenance personnel below 0.9 m are required to use the drying of wood or rubber insulation for reliable temporary obscuration.

6, when using electric tools, there is protection against electric shock.

7, when using ladders, ladder and the angle of 60 degrees between scenes is appropriate, the scene in the cement to use the ladder, must have anti-slip, and to someone hold your ladder.

8, find any conductive part of tile machine grounded, without cutting off power supply before, in addition to rescue those electric shock, be not allow to close to, leaving around 4 meters far away, from 1.8 meters indoor , in case of damaging from the step voltage.

9, in the repair of the equipment, pull down the switch and the Knife, and switch and the knife place must display”prohibition switch, someone work” warning signs. Electric equipment in theshelterrailingand prohibit passage of the aisle, he shall be hung, “stop,High voltage danger” warming signs, place of work should be hung “In this work” the warming signs.

Add: no. 81 north railway station street, botou city, hebei province, china  Postcode:062150 Tel:0086-317-8267555
Botou Xianfa Roll Forming Machine Factory