Metal Corner Trim Forming Machine

Roof Ridge Cap Roll Forming Machine for Northern Ireland. The station of Ridge Cap Machine is 12 rows. Speed of Cap Forming Machine is 15m/min. Feeding material of Ridge Capping Machine is aluminum coils. Power of Roof Ridge Making Machine is 4+4Kw. If you need Ridge Cap Forming Machine for Glazed Tile Roll Forming Machine. Contact the following information.

Metal Corner Trim Forming Machine

Corner Trim Forming Machine,Ridge Cap Rollforming,Metal Ridge Cap Rollforming

Corner Trim used for roof， Most used in USA and Ireland.

XF Corner Trim Forming Machine  

Quick Detail

1.Suitable to process:Color steel plate

2.Width of the plate: Customized

3.Rollers:15 rows 

4.Dimensions:7*1*1.4 m

5.Power:4+4 kw

6.Thickness of the plate: 0.3-0.8 mm

7.Productivity: 8-15 m/min

8.Diameter of the roller:Φ70 mm

9.Weight:About 3 T

10.Voltage: 380 V 50 Hz 3 phases

11.Material of the cutting plate: Cr 12

12.Hydraulic:45#

13.Processing precision:Within 1.00 mm

14.Control system: PLC control

Manual Uncoiler:

Usage: It is used to support the steel coil and uncoil it in a turnable way. The steel coil is uncoiled by hand. 

Loading capacity: 3 Tons      Inner diameter: 470-530 mm

Main Roll Forming Machine:Material of rollers:45# steel，roller surfaces polishing, hard plating , The polished surface and the heat treatment towards the molds also can keep the molding plate surface smooth and not easy to be marked when it is being stamped.

Hydraulic oil: 40#

hydraulic oil into the hydraulic oil tank ,the pump drive the cutter machine to begin the cutting job.

The target piece`s length is adjustable and digit of it can be adjusted. Computed mode has two modes: automatic and manual one. 

The system is easy to operate and use.

Frequency converter:EURA

It adopts the hydraulic drive and automatic location to decide the dimension and cut the target products.

Material of blades: Cr12,quenching treatment