Botou Xianfa Roll Forming Machine Factory
Thistype of sheet can be widely used in plant, house, storage and simple
steelroof and wall. It has advantage of pretty appearance, durable using and so on.
(1) 5tons hydraulic un-coiler:
Hydraulic motor drives. One single-headstructure. It has a pressing arm to prevent the coil loose.
Electric uncoiling, hydraulic motor tenses thecoil inner.
The max. coil inner-diameter is 508mm.
The max. coil outter-diameter is 1200mm.
The max. width of coil is 1250mm.
The max. capacity is 5 tons.
Welded steel structure base, chains transmit,motor drives it. The machine include the filming device .
The roller is designed by Germany softwareCOPRA, and has FEA analysis, which can promise the product precision.
About12 stations to form; Material of Roller: 45#,with hard chrome coated, polishing,
Voltage:380V/50Hz; Line speed: about 3.5 m/min
(3)Hydraulic pressing/ Cutting:
Stop to press, Stop to cut, Post cut .Cuttingtool material: Cr12, pressing tool material:40Cr.
Tolerance of the cutting length ±2mm.
It is 2 parts, 6 meters total.
It offers power for the cutter.
It uses Siemens PLC system to control thewhole line. It can measure and cut the length automatically. Frequency adjuststhe speed and it has the self-control speed function.
Human-machine screen, touch screen control.The length can be set in touch screen freely and operation is simple.
The surround connecting wires adopts aviationsocket or fast-speed plug.
(7) Safety barrier system
To protect the workers safely when working.
Descriptionsof Roll Forming Machine for Roof Panel, Wall Panel:
1.This kind of Cold Roll Forming Machine is widely used for making variousmetal wall panels and roof panels for steel constructions, steel structureprojects and containment systems etc.
2. This production line consists of feeding unit, uncoiler, feeding guide, rollforming machine, cutter, automatic stacker, hydraulic system and electriccontrol system.
3. The line speed of this panel forming machine is 40m/min.
Components of Roll Forming Machine forRoof Panel, Wall Panel:
Electric un-coiler, with coil-car
Load capacity = Max.10Tons;
2) Roll forming machine:
About 18steps to form;
Material of Roller: 45# steel withchromizing on surface
Voltage:380V/50Hz; Main line speed:40m/min;
3) Hydraulic cutter:
1) Stop to cut, Post cut,
2) Cutting tool material: Cr12, Heat treatment
4) PLC control system:
Using Mitsubishi PLC Control the quantity, length automatically, LCD screen;remote control available
Copyright © 2018 Botou Xianfa Roll Forming Machine Factory All rights reserved.