Track and Stud Forming Machine for Gypsum Channels

New design Stud and Track Furring Roll Forming Machine for Mexico. One Main Channel Machine could process three siezes product. Speed of Track Forming Machine will up to 40m/min. There also two sizes punching hole of Furring Channel Roll Forming Machine. If you have requirements about Track and Stud Forming Machine,pls contact me.

keel Roll Forming Machine for ceiling,Machine for Gypsum Channels,metal light keel roll forming machine.

Suitable thickness is 0.4-1mm.

The system is made of durable galvanized steel, usually it uses gypsum boards as surface material. It is widely used in offices and residential building for its easiness of installation. Compared with wooden board, gypsum boards can provide a safer and fire-resistive wall. And, compared with bulky brick wall, it can greatly reduce the weight of building. Besides, thermal and acoustic insulation product may be filled in partition frame to create a safe and quiet environment.

The system is made of durable galvanized steel, usually it uses gypsum boards & calcium silicate board as surface materials.

 Vertically fit the stud into the track. The maximum distance between studs is 610 m/m. Gypsum boards may be screwed or nailed on the both flanges. Both flanges have slide-proof points to prevent projecting screws from sliding while fixing the gypsum board.

stud and track roll forming machine Component Specification

Manual Uncoiler

Usage: It is used to support the steel coil and uncoil it in a turnable way. 

The steel coil is uncoiled by hand.Loading capacity: 3T,Inner diameter: 500-508mm

Main Roll Forming Machine:

Material of rollers: 45# steel, roller surfaces polishing, hard plating. 

The polished surface and the heat treatment towards the molds also can keep the molding.

Plate surface smooth and not easy to be marked when it is being stamped

Hydraulic System and Computer Control Cabinet

Power: 5.5KW, Hydraulic oil:40#.

Hydraulic oil into the hydraulic oil tank, the pump drives the cutter machine to begin the cutting job.

The target piece`s length is adjustable and digit of it can be adjusted

Computed mode has two modes: automatic and manual one. 

The system is easy to operate and use. Plc: EURA

Shearing Mechanis

It adopts the hydraulic drive and automatic location to decide the dimension and cut the target products. 

Material of blades: Cr12, quenching treatment.

Packaging & Shipping

1.We have professional technicians for loading

  Guaranteed the goods load into container without any damage.

2. Transportation : Machines need one 20 feet container to hold

3.Please provide us the nearest port name, we will ask shipping cost and arrange shipping for you.

looking for ideal Roll Forming Machine Manufacturer and supplier 

We have a wide selection at great prices to help you get creative.

All the Roll Forming Machine are quality guaranteed.  

If you have any question, please feel free to contact us.