Floor Deck Forming Machine for Philippine

Floor Deck Making Machine for Philippines. Suitable 2mm thickness coils. The number of Floor Deck Forming Machine staion is 28. 

The power of Floor Deck Roll Forming Machine is 44+7.5Kw. About Cold Roll Forming Machine, there are many profile sheets. If you are interested in Roll Forming Machine, pls provide the drawing to us. Or contact us to recommend one for you. Roll Forming Machine Accessory

XF Floor Deck Forming Machine

Quick Detail

1.Suitable to process:  steel plate

2.Width of the plate: 1220 mm

3.Rollers: Up layer: 27 rows 

4.Dimensions: 12*1.6*1.5 m

5.Power: 22+22+7.5  kw

6.Thickness of the plate:2 mm

7.Diameter of the roller:Φ120 mm

8.Weight: About 12 T

9.Voltage: 380 V 50 Hz 3 phases

10.Hydraulic: 40#

11.Processing precision: Within 1.00 mm

12.Control system: PLC control

Manual Uncoiler: Usage: It is used to support the steel coil and uncoil it in a turnable way. The steel coil is uncoiled by hand. 

Loading capacity:5 Tons      Inner diameter: 470-530mm

Main Roll Forming Machine:Material of rollers:45# steel，roller surfaces polishing, hard plating , The polished surface and the heat treatment towards the molds also can keep the molding plate surface smooth and not easy to be marked when it is being stamped.

Hydraulic oil: 40#

hydraulic oil into the hydraulic oil tank ,the pump drive the cutter machine to begin the cutting job.

The target piece`s length is adjustable and digit of it can be adjusted. Computed mode has two modes: automatic and manual one. 

The system is easy to operate and use.

Frequency converter:EURA

It adopts the hydraulic drive and automatic location to decide the dimension and cut the target products.

Material of blades: Cr12,quenching treatment

Our factory was established in 1996, we are the professional factory of roll forming machine.

The main products are trapezoidal sheet roll forming machine, Corrugated Sheet Roll Forming Machine, glazed tile roll forming machine, Double Layer Roll Forming Machine and so on.